Jøtul F 360 Series Installation And Operating Instructions Manual page 9

Fig. 4
8. If the glass décor set (optional extras) is to be used, the 4
recessed head screws on the bottom are removed (fig. 4 B)
with the aid of the key included with the glass décor set.
4.2 Assembly
Jøtul F 361 - cast-iron base
N.B. If the flexible hose is to be connected through a hole in the
floor, the knock out covers are not knocked out/removed.
Fig. 5
1. If flexible hose, 100 mm diameter, for external air supply is to
be connected to the outlet under the burn chamber (fig. 4C), drill
one hole (fig. 5 C) in each cut-out cover at the lower part of
the base and knock them out. N.B. Make sure the rear plate
(fig. 7 A) in the base is positioned, when the cut-out cover is
being knocked out.
ENGLISH
9