Advertisement
Bad, crooked or rough cuts.
Blade is twisting.
envirOnment PrOtectiOn
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar
01284 757500
© Jack sealey limited
1. feed pressure too great.
2. Blade guides are misaligned.
3. inadequate blade tension.
4. Blade is dull.
5. incorrect speed.
6. Blade guides are spaced out too far.
7. Blade guide assembly is loose.
8. Blade is too coarse.
1. Blade is binding in the cut.
2. Blade tension is too high.
01284 703534
Original Language Version
1. reduce feed pressure.
2. Adjust blade guides.
3. increase blade tension.
4. replace the blade.
5. Adjust the speed.
6. Adjust guide spacing.
7. tighten the guide assembly.
8. Use a finer blade.
1. reduce feed pressure.
2. decrease blade tension.
sales@sealey.co.uk
www.sealey.co.uk
sM65.V2
Issue 4 (H, F) 06/02/18
Advertisement
