Vessel Stat Clean CF300-E Instruction Manual page 8

Before Use
■
Connector connection
Insert the included special AC adapter connector into the jack
on the back of the body.
Power Supply Adapter
Use the power adapter（AD24-ITE）which is specifically designed for use of CF300-E.
The AC adapter plug is a 2-pronged plug.
Connect this to a power outlet that has a ground terminal.
Connection of grounding wire
Plug this unit into a power receptacle which has a ground terminal.
If no such power receptacles are available, ground the unit with a wire
connected to the ground terminal of the unit.
Daily Checks
Check CF300-E for inspection before use. Refer "Maintenance" pages.
・Dust on electrodes
・Contamination of the front cover
・Dirty filter
・Disconnection of the grounding wire
・Loose connector
・Damaged or loose parts
・Adhering condensation or water droplets
If damage or trouble is detected, contact the supplier for servicing.
2 4