Table of Contents
Advertisement
1. When Used on a Desktop
CF300-E can be used on the desktop.
Do not locate on unstable tables, etc. CF300-E can
be damaged and malfunctioned if it falls.
2. When Mounted on a Wall or Structure
・Select a location and height in consideration of
CF300-E's static electricity removal range.
(For information regarding the static electricity
removal range, refer to the section Performance.)
・ Use the mounting holes in the bottom of the stand to
secure it to the structure or cell base.
(For the dimension drawing, refer to the section Exterior view.)
・The angle can be adjusted using the angle adjusting knob located on the left and right sides of the
stand.
Securely tighten these knobs after confirming the angle.
・Do not install this unit in dusty, hot or humid places or where possibly wet by water and oil.
・Keep objects from getting in-between CF300-E and the target area.
・Before installing CF300-E, check the strength of supporting structure.
REMEMBER
REMEMBER
REMEMBER
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED
CAUTIONS
Use only the included power supply adapter. Use of other adapters may
results in fire, electric shock and static electricity removal trouble.
If noticing anything strange, stop using CF300-E immediately.
Be sure to connect the grounding wire.
A failure may result if this unit is not properly grounded.
Do not use CF300-E other than static electricity removal.
Do not remodel or disassemble CF300-E. CF300-E contains high
voltage parts.
Do not drop CF300-E or apply strong impacts.
Keep CF300-E away from sources of heat.
Do not test the electrode wires for grounding, short-circuiting or sparking.
These tests can adversely affect ion balance.
IN BEFORE USE
2 3
Installation
■
Before Use
■
Advertisement
Table of Contents
