Table of Contents
Advertisement
Operation
■
1. CONNECTING THE AC ADAPTER
Power can be externally supplied to the unit without using
the provided AC adapter.
Carry out wiring with a Molex connector as shown in the figure.
Be sure to connect the ground connector. Otherwise, connect the
ground terminal, which is located on the back side of the body, to
the ground with a wire.
When stopping the unit, shut off the external power supply.
2. TURNING ON THE UNIT
Turn the power switch
(POWER) to the [I] position.
The power light illuminates and
the operation will start.
3. TURNING OFF THE UNIT
Turn the power switch (POWER) to the [O] position. The power light goes off and the operation will
stop.
4. AIRFLOW ADJUSTMENT
The airflow can be adjusted continuously by turning the airflow adjustment (FAN SPEED) rotary control
using a thin flat-tip screwdriver.
2 6
Advertisement
Table of Contents
