Jolly Mec Control Display User Manual page 12

NOTE
* The room set value is not considered if THERMOST was set as the room probe in MENU 4.
12
4
3
4
4
3
4
3
4
3
4
3
4
M2-3-005: START 2
3
M2-3-006: STOP 2
M2-3-007: PROG- 2
4
M2-2-001 ENABLE CHRONO
Use Keys 1 and 2 to select to enable or disable the
chronothermostat function and press Key 4 to confirm
the selection and move to the next page. This function
can be accessed more rapidly by Keys 1 and 2 on the
main page.
When finished, the message DONE will be displayed
to confirm correct data entry. Next, the level page
automatically returns to the Menu Page.
M2-3-001 CHRONO DAY
Use Keys 1 and 2 to select to enable or disable the DAY
TIMER function and press Key 4 to confirm the selection
and move to the next page.
5
M2-3-002 START 1 DAY
Use Keys 1 and 2 to set the start time for the first
operating time range permitted by the function and
press Key 4 to confirm the selection and move to the
next page. Set OFF to disable the time range.
5
M2-3-003 STOP 1 DAY
Use Keys 1 and 2 to set the end time for the first
operating time range permitted by the function and
press Key 4 to confirm the selection and move to the
next page.
5
M2-3-004 SET ROOM T PROG- 1
Use Keys 1 and 2 to set the room temperature value to
be reached in the first time range and then press Key
4 to confirm the selection and move to the next page*.
5
The next three screens, similar to the previous three, let
you set the same parameters for the second operating
time range permitted by the function.
When finished, the message DONE will be displayed
to confirm correct data entry. Next, the level page
automatically returns to the Menu Page.