Webasto Thermo Series Installation Instructions

Installation Instructions

7-Day Digital Comfort Timer Model 1531 for Thermo Series
Installation Instructions
1. Find a suitable location on the dashboard. Ensure at least a 2.0" (51.0 mm) depth clearance
before cutting into the dashboard.
2. Place the mounting frame template on the dashboard.
3. Drill 6 mm (0.25") corner holes.
4. Drill 5 mm (0.1875") mounting holes for mounting the frame to the dashboard.
4. Cut out the mounting hole.
5. Mount the timer mounting frame.
6. Make all electrical connections as shown in the schematic (next page).
7. Insert the timer into the mounting frame.
Mounting Frame P.N. 474630 (not to scale)
For questions concerning these installation instructions or products detailed on this sheet, call:
Rev. 05/2002 907610
Dash cut-out dimensions for
mounting without frame.
Length:
Height:
Corner Radius:
Depth:
www.webasto.com
3.32" (84.5 mm)
1.5" (38.2 mm)
0.12" (03.0 mm)
2.0" (51.0 mm)
1-800-555-4518 USA
1-800-667-8900 Canada
Page 1 of 2