Cps-120 Touch Control Panel - TeachLogic Matrix IMA-120 Installer And Operation Manual

Matrix
owner's manual transmitter
CPS-120 touch panel
panel operation
1. Connect cable between amplifier RJ-45 and remote touch panel RJ-45.
Place RS-232 switch in the "ON" position to activate touch panel.
2. When wall plate power is on, the LCD screen will illuminate the logo.
3. The LCD screen will illuminate in two brightness levels,
DIM (power save mode) and ON (full brightness).
4. To activate the screen press any button to turn the screen ON.
5. When the LCD screen light is ON, you can press any of the eight available input
source buttons to adjust the volume.
6 Amplifier controls are deactivated when RS-232 switch is in ON position.
16