Page Pass Through - TeachLogic Matrix IMA-120 Installer And Operation Manual

Matrix
page over-ride/page pass through
The page over-ride feature allows you to connect the TeachLogic amplifier to the school
paging/intercom system for muting purposes. A simple connection between the in-
classroom paging speaker (typically 25v, 70v or 100v) and the TeachLogic page input
will mute all the inputs and pass the page to the speakers connected to the TeachLogic
amplifier
(a) Unplug the 2 pin green Phoenix connector
Connect the speaker cable from the paging system to the 2 pin
Phoenix connector of the Page input
Reconnect the 2 pin green Phoenix connector
(b) Determine the signal level of the paging system (25v, 70v, or 100v)
Set the slide switch to the appropriate speaker level setting
With the TeachLogic amplifier turned ON, send a page signal
through the page input
(c) Adjust the page input SENSITIVITY control, located on front panel,
so that an incoming page/intercom signal will override any audio
(mics, line, etc) plugged into the TeachLogic amplifier.
12
owner's manual transmitter