Table of Contents
Advertisement
CHAPTER 1: OVERVIEW
1.1 INTRODUCTION
Use the Emerald 4K Rackmount Tray (EMD4000-RMK1) to mount up to (2) Emerald 4K Transmitter and/or Receiver (EMD4000-T/R) units
in a 2-/4-post 19" rack or cabinet.
1.2 SAFETY
WARNING!
Rack loading — Overloading or uneven loading of racks may result in shelf or rack failure, possibly damaging the equipment and
causing personal injury. Stabilize racks in a permanent location before loading begins. Do not exceed your rack's load rating.
1.3 WHAT'S INCLUDED
The EMD4000-RMK1 contains the following:
Š Rack Tray (including one blank panel)
Š
Š Hardware kit – (2) locking brackets, (4) each screw & cage nuts, (2) thumbscrews, (8) M3 x 6mm countersunk screws
Š
Š Insert Card – How to download your documentation
Š
1.4 RACKMOUNT TRAY ILLUSTRATED
Figure 1-1 shows the inside of the rackmount tray.
Power adapter
FIGURE 1-1. INSIDE OF THE RACKMOUNT TRAY
1.877.877.2269
Cable routing
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Stop guides
3
Advertisement
Table of Contents
