Table of Contents
Advertisement
Description of the Upgrade
This upgrade extends the upper frequency limit of your 20 GHz standard test set analyzer
(N5230A/C Option 220) to 40 GHz. This is done by installing Option F40. After installation of
this upgrade, your analyzer will be an N5230A/C Option 420.
Option F40 provides the necessary 40 GHz components and cabling to allow your analyzer to
measure signals up to 40 GHz.
Getting Assistance from Agilent
Installing this upgrade kit requires special skills and experience. If you think you may not be
qualified to do the work, or need advice, contact Agilent.
Contacting Agilent
Assistance with test and measurements needs and information on finding a local Agilent
office are available on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, please contact your Agilent field engineer.
In any correspondence or telephone conversation, refer to the Agilent product by
NOTE
its model number and full serial number. With this information, the Agilent
representative can determine whether your product is still within its warranty
period.
Installation Note N5230-90010
3
Advertisement
Table of Contents
