Before inserting
The outer seats are not mutually interchangeable.
›
Insert the seat marked with the letter L in the rear
on the left and the seat marked with the letter R in
the rear on the right.
›
Before inserting the middle seat, open the cover
cap for the socket outlet in the floor.
Insert and lock
Folding back seats
›
Carefully fold the raised seat into the horizontal
position until it clicks into place.
Move outer seats in the transverse direction
Before moving
›
Take out the middle seat.
›
Close the cover cap for the socket in the floor.
›
After removing the
middle seat, close the
cover cap for the sock-
et outlet in the floor.
›
Place the seat on the
guide rods and lock in
place using the seat
locks.
›
Make sure that the
seat cannot be re-
moved.
›
Pull on the loop.
›
Press the backrest
backwards until it audi-
bly clicks into place.
Seats, steering wheel and mirror ›
Moving
Folding back into the starting position is accomplish-
ed in the reverse order.
Headrests
Adjusting the height of the headrests
Front headrests
Rear headrests
Headrests
37
›
Fold up the outer seat
and release it by press-
ing the seat locks.
›
Move seat on the guide
rods towards the mid-
dle of the vehicle up to
the stop.
›
Lock the seat at the
end of the guide rods
by pressing the seat
locks.
›
Make sure that the
seat cannot be re-
moved.
›
Carefully fold the
raised seat into the
horizontal position until
it clicks into place.
›
Hold the safety button
and move the headrest
in the desired direc-
tion.
›
Move the headrest in
the desired direction.
When pushing down,
press and hold the
safety button.