Table of Contents
Advertisement
LC-20B2H
LC-20B2M
• Setting screen of "PUBLIC MODE"
PUBLIC MODE
MAXIMUM VOLUME
VOLUME FIXED
REMOTE CONTROL
USER CONTROL
ON SCREEN DISPLAY [YES
AV1 INPUT
RESET
ENTER
1. You can select each item of functions by pressing cursor UP/DOWN keys on the remote control or CH]/[
keys on the LCD TV. The letter of selected item turns to yellow colour when you selected it.
2. The setting position of each item of functions are made by pressing cursor RIGHT/LEFT keys on the remote
control or VOL (+)(-)keys on the LCD TV.
3. Select ENTER position after you set all functions , and press cursor RIGHT/LEFT keys on the remote control
or VOL(+)(-)keys on the LCD TV for confirmation.
Unless otherwise you make ENTER confirmation, the settings will not be memorized.
6-functions of Public Mode settings expand for public application
1. MAXIMUM VOLUME (1—————60)
You can set the maximum volume at your desire level.
2. VOLUME FIXED (VARIABLE / FIXED)
You can fix the sound volume at your desire level.
When you set to "FIXED",the sound volume which you just set is fixed.
3. REMOTE CONTROL (RESPOND / LIMITED)
If you set "LIMITED", remote control keys of POWER,CH]/[,VOL(-)/(+) and BRIGHT keys are responded,
but other keys are not responded.
This is a position that you can not make MENU adjustments.
4. USER CONTROL (RESPOND / NO RESPOND)
"NO RESPOND" means that the TV does not respond when you press a user control buttons except main power
button on the main unit.
5. ON SCREEN DISPLAY (YES / NO)
If you set "NO"position,OSD will not appear.
6. AV1 INPUT (NORMAL / START / AV1 FIXED)
Some application use DVD or VCR connecting to AV1 input of our monitor and you will not want to change it
to other mode,such as Component or AV2 input.
You can set the position of input "AV1 FIXED"
For other application that you want to start AV1 every time when you press power button, and you may select
other input mode after then, set it at "START" position.
7. RESET
You can cancel all Public Mode settings. (It returns to the factory setting.)
8. ENTER
You make sure after you have specified all functions, then press the enter key. Unless otherwise you press the
enter key, all positions that you have selected will not be set.
[
60]
1()2() • ()59()60
[VARIABLE
]
VA RIABLE()FIXED
[RESPOND
]
RESPOND()LI MITED
[RESPOND
]
RESPOND()NO RESPOND
]
[NORMAL
]
NORMAL ()START()AV 1 FIXED
Factory setting
12
YES()NO
Adjust setting
Advertisement
Table of Contents
