Advertisement
To clean the body of the steam station use a soft damp cloth.
Do not use strong detergents or harsh abrasive cleaners to clean the steam
station
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug has to
be removed, it should be cut off and carefully disposed of immediately. To avoid a
possible shock hazard, do not insert the discarded plug into a mains socket.
Fitting a new plug
The mains lead must be connected as shown below. The wires are coloured with
the following code - Brown wire = Live (L), Blue wire = Neutral (N), Green &
Yellow = Earth (E).
• The Blue wire must be connected to the terminal marked N or coloured Black.
• The Brown wire must be connected to the terminal marked L or coloured Red.
• The Green & Yellow wire must be connected to the terminal marked E or coloured
Green.
• Check that there are no cut or stray strands of wire inside the plug.
• Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.
• If you are in any way unsure which plug or fuse to use, always refer to a qualified
electrician.
• After replacing or changing a fuse on a moulded plug, the cover must be refitted
to the plug; the appliance must not be used without a fuse cover.
Connect
Green &
Yellow to
Earth (E
)
Connect
Blue to
Neutral
(N)
Connect
Brown to
Live (L)
Ensure the outer sheath of the
mains lead is securely held by the
cable clamp
Advertisement
