Advertisement
Before the first time you use your Steam Station Iron
Before using your Steam Iron for the first time remove the plastic protector from
the soleplate and clean the soleplate with a soft damp cloth.
Operating Instructions
To keep the base smooth do not run it over metal objects such as zips, buttons
etc.
Selecting the temperature
1. Refer to the ironing instructions on the garment to be ironed
2. If the garment doesn't have any ironing instructions but you know the type of
fabric, use the guide on the temperature controller..
3. Fabrics with special finishes (polishing, pleats, etc) should be ironed at the
lowest temperature setting.
4. With mixed fibres always select the lowest applicable temperature.
5. Group items with similar fibres together, as the iron heats up faster than it cools,
start ironing items requiring the lowest temperature first.
6. Turn the temperature dial to the required setting according to the guide below:
Preparation For Use
1. Take out the water tank (1) and fill to the MAX level.
2. Replace the water tank ensuring that it is correctly position and fully closed.
3. Turn on the steam station by using the On/Off switch (12).
4. Set the temperature control (5) to the desired setting.
5. The Iron Heating Indicator (2) will illuminate until the iron has reached the
desired temperature.
6. When the steam temperature is reached the Steam Ready Indicator (10) will
illuminate.
Do not use chemically de-limed or perfumed water.
Advertisement
