SAFETY PRECAUTIONS
6
!
CAUTION
• Do not install the product on transportation devices (Vehicle/Ship/Airplane etc.)
It can cause problem to the product.
• When using combustion devices along with the air purifier in closed indoor setting,
frequently ventilate the room.
Some hazardous substances, such as carbon dioxide may not be fully removed.
• When installing the product close to TV or audio, leave 1 m of clearance.
TV or audio may malfunction.
• Install the product on a firm location and do not push over or apply impact to the
product.
It can cause fire and problem to product.
• Provide distance of more than 1.5 m from lighting appliance and more than around
10 cm from the wall.
This will be the cause of the product discoloration and the cleaning capability may be
deteriorated.
• Do not use the product as ventilation fan or hood for the range in the kitchen.
It can shorten the product life.
• Do not use the product to remove toxic gas such as carbon monoxide.
It can cause product failure.
• Do not use the product near the curtain.
Humidity sensor may not work properly.
• Do not let the child open the front panel.
The product can fall on top of the child to cause injury.
• Do not move the product by grabbing the front panel of the product.
The product may partially be damaged.
• Do not place any obstacles around the air inlet or outlet of the product.
This can cause product failure.
• Do not use the product for special application/location such as preservation of ani-
mal/plant, precision machinery, artifact etc.
This can cause property damage.
• Do not clean the product with strong detergent such as solvent but use smooth
cloth.
It can cause fire and product deformation.
• Do not store or use combustible gas or flammable material near the product.
It can cause fire or product failure.
• When not using the product for an extended period of time, pull out the power
plug.
It can cause product failure or fire.
• Be sure to insert all the filters before the use and perform regular cleaning of the
Pre filter.
Otherwise, it will be the cause of product failure.