LG PH-U459KN Owner's Manual page 4

SAFETY PRECAUTIONS
4
• When using the multi-outlet, do not use several appliances at the same time.
Excessive use of electric power will be the cause of fire and electric shock.
• When the outlet is damaged or loosened, do not use it.
It will be the cause of fire and electric shock.
• When gas is leaked, perform the ventilation by opening the window before operat-
ing the air purifier or remote controller.
Otherwise, it will be the cause of the explosion, fire, and burn.
• Do not use the product at the location where moisture or floating particles are pre-
vailed such as toilet or bathroom, laundry, etc.
This will be the cause of fire and electric shock.
• Carry out the installation by avoiding direct sunlight, heating appliance, and damp-
ness.
These will be the cause of the electric shock, fire, and failure.
• Do not apply any impact on the front panel.
It can cause injury, product damage or electric shock.
• Do not turn off the product by unplugging the power.
It can cause electric shock or problem to the product.
• Do not place fire source near to the product.
This will be the cause of fire.
• Insert securely the power plug up to the end of its plug so that it will not be
shaken.
If connection is unstable, it will be the cause of fire.
• Do not touch the power plug with wet hand.
This will be the cause of electric shock and injury.
• Do not remove the plug by pulling its power cord section.
This will be the cause of fire and electric shock.
• Do not place rug etc. on the power cord.
If heavy object is placed on the rug because the cord is invisible, it will be the cause of
fire and electric shock.
• Do not touch the product and filter with wet hands.
It can cause electric shock or problem to the product.
• When cleaning the product, start only when the power is unplugged and the rotat-
ing fan stops.
It can cause electric shock or injury.
• Do not let the moisture generated from the humidifier directly contact the product.
It can cause electric shock, fire and problem to the product.
• Do not install the product at the location where excessive industrial oil smoke or
metallic dust is prevailed.
This will be the cause of fire and product failure.
• If the product is flooded, always entrust it to the customer care center.
There is the hazard of electric shock or fire.