Page 1
This document describes how to load a V6 UIM Service Pack. It also describes how to load software option and upgrades for FST-2000 TestPad application modules that are compatible with Version 6 (V6) and Version 3 (V3) user interface modules (UIMs).
TestPad is connected to an AC adapter and the adaptor is plugged in. Always use the AC adaptor that shipped with your UIM. Using a different adaptor may damage the unit. Acterna also recommends using a battery charged to at least 50 percent capacity as a backup power supply.
Page 3
6 Respond to the prompts as directed. After all upgrade files are loaded, the TestPad automatically reboots, and the main screen appears. The application module software upgrade is loaded. June 2004 FST-2000 TestPad Service Pack/Upgrade/Optioning Instructions...
Page 4
The Number Remaining field indicates the remaining copies of the option which are available for installation. Each time you install an option, the TestPad decreases the number remaining by one. Select the option or options you want to install. FST-2000 TestPad Service Pack/Upgrade/Optioning Instructions June 2004...
Page 5
– If the unit already has the correct software release, it automati- cally begins loading the options you purchased. When the main screen appears, the options are loaded. June 2004 FST-2000 TestPad Service Pack/Upgrade/Optioning Instructions...
Need help?
Do you have a question about the FST-2000 TestPad and is the answer not in the manual?
Questions and answers