Care Instructions; Warranty - ProMed FB-100 Instruction Leaflet

CARE INSTRUCTIONS

• Pull the mains plug before cleaning.
• Empty the device after every use and dry the filling area with a cloth.
• Before cleaning the device, make sure that the device is switched off and the mains plug has been pulled
out from the socket.
• Empty the water and clean the cold device with a cloth and, if necessary, with a suitable disinfectant (e.g.
Promed Pure-FD (article no. 330815)).
• Do not use any aggressive substances, such as thinners or scouring milk for cleaning. This may have
negative effects on the surface.
• Clean the outer surface of the device only with a soft, damp cloth. Subsequently rub it dry with a soft, dry
cloth.
• Store the device in a dry and cool place.
• Carefully wind the power cable to prevent the cable from breaking.
• If you have any questions, please contact our service department.
• In case of malfunction or defects, please send the device to the manufacturer.
DISPOSAL
DE
Power tools, accessories, and packaging should be recycled in an environmentally suitable manner.
Only for EU countries:
Do not dispose of power tools with the domestic waste! In accordance with the European Directive
EN
2012/19/EU on waste electrical and electronic equipment and its implementation into national law,
nonfunctioning power tools must be collected separately and recycled in an environmentally suitable
manner.
This symbol indicates that disposal of this product in the domestic waste is not permitted within the EU. Waste
FR
devices contain valuable recyclable material that should be recycled. Recycling also prevents uncontrolled
waste disposal from damaging the environment and human health. Therefore, please dispose of all waste
devices in the appropriate collection systems or send the device to the place where you bought the device
IT
for disposal. They will then recycle the device.

WARRANTY

ES
This product was produced with the utmost care and was thoroughly tested before it left the factory. Therefore,
NL
we provide a warranty period of 24 months from the date of purchase for this product. Promed products
conform to their description and the relevant specifications; it is your responsibility to ensure that the product
which you have purchased is designed for your intended use.
• In the event of material defects and/or manufacturing errors which appear during proper use and are
RU
detected during the warranty period, we will replace all defective parts of the product free of charge within
the warranty period, including the labour costs for warranty repairs.
• The warranty does not cover:
PL
• Normal wear on the product
• Defects which were caused during transportation or storage of the product
• Defects or damage which were caused through improper use or inadequate maintenance
• Damage resulting from disregarding the notes in the operating manual
SE
• Damage resulting from modifications to the product which were not carried out by Promed.
• Damage caused by sharp objects or as a result of torsion, compression, being dropped, an abnormal
impact or other actions which are beyond Promed's reasonable control.
AR • Parts which are subject to wear (e.g. moving parts such as ball bearings, etc., fasteners, etc.) are
generally excluded from the warranty.