Installing The Wall Mount; Changing The Battery - Becker Centronic MemoControl MC441 Operating Instructions Manual

Operating Instructions
38,5

Installing the wall mount

95
43,6

Changing the battery

• Before installing in the position re-
quired, check that the transmitter and
receiver are functioning properly.
• Fix the mount to the wall with the
two screws provided.
1. Open the battery compartment door.
2. Take out the batteries.
3. Insert the new batteries in the correct
position.
Clean the device with a damp cloth only.
Do not use a cleansing agent since this
could damage the plastic.
17