Munchkin Brica Baby In-Sight Instructions

Munchkin Brica Baby In-Sight Instructions

Advertisement

Back Seat Head Restraint

D-Ring
Clip
Adjustable
Stand
Clamp

Tether Anchor

Adjustable Stand
Fastener
Clamp

Center Back Seat with Deck

Adjustable
Stand
Fastener
Clamp
Back Seat
Rear Deck
Baby In-Sight
• Raise head restraint.
• Insert clamp underneath head restraint.
• Wrap adjustable stand over top of head restraint.
Strap
• Bend clamp upward to conform to head restraint.
• Attach strap's clip to D-Ring.
• Lower head restraint down to secure in place.
• Tighten strap and rotate mirror to desired angle so your child is visible to driver
in vehicle's rear-view mirror.
Keep mirror out of baby's reach and direct sunlight. Always carefully follow car seat
manufacturer's directions for correct installation and position of a child safety seat.
If the tether anchor is being used to secure a child safety seat, do not use this
attachment method.
IMPORTANT: Do not attach this product to your vehicle's tether anchor if your child
safety seat is installed in your vehicle using this anchor.
• Position mirror on back seat in front of tether anchor.
Clip
• Insert clamp between seat and rear deck of your vehicle.
• Bend clamp to conform to seat shape.
• Attach clip to tether anchor and tighten strap.
• Unfasten adjustable stand's fastener, and tilt mirror to desired angle so your child
is visible to driver in the vehicle's rear-view mirror.
Tether
Anchor
NOTE:
The tether anchor attachment method is designed for sedan vehicles. If you own a
mini-van, station wagon or sport utility vehicle (SUV) and would like to use the
tether anchor attachment, you may need a tether extender. Please visit BRICA® at
brica.com or call 1.866.869.8257
• Position mirror on center front side of back seat.
• Bend the clamp to conform to the top of back seat.
• Insert clamp between seat back and rear deck.
• Adjust as needed so clamp is secure.
• Unfasten adjustable stand's fastener, and tilt mirror to
desired angle so your child is visible to driver in vehicle's
rear-view mirror.
®
63010
Questions?
1.866.869.8257
brica.com
©2012 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Brica Baby In-Sight and is the answer not in the manual?

Questions and answers

Summary of Contents for Munchkin Brica Baby In-Sight

  • Page 1 Baby In-Sight ® 63010 Back Seat Head Restraint • Raise head restraint. D-Ring Clip • Insert clamp underneath head restraint. • Wrap adjustable stand over top of head restraint. Strap • Bend clamp upward to conform to head restraint. • Attach strap’s clip to D-Ring. •...
  • Page 2 Baby In-Sight ® 63010 Center Back Seat on Bench Seat • Position mirror on center front side of back seat. Adjustable Stand • Bend clamp to conform to top of the back seat. • Squeeze clamp firmly to secure mirror in place. •...

Table of Contents