Table of Contents
Advertisement
Figure 2. Installing the vertical stand
4. Reconnect the power cord and all disconnected cables to the computer.
Note: If a locking device is available, use it to lock the computer.
Power cord
Prerequisite
Before you start, read Appendix A "Important safety information" on page 67 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
3. Replace the power cord.
.
Chapter 7
CRU replacement
43
Hide quick links:
Advertisement
Table of Contents
