Commands For Individual Configuration Multipen; Display Configuration - TECTUS Multipen Series Command Manual

6.0 Commands for individual configuration Multipen
With the cw command and the individual hex address you can configurate the Multipen.
‐ Using Multipen for Left‐hander or Right‐hander
‐ Shows UID in big font or small font on the Display
‐ Display ON or OFF by reading tags
‐ Show UID in decimal on Dispaly (only when MP is in HID Mode)
‐ Configuration Auto Power Off Timer
‐ Bluetooth ON by power ON
‐ And more.....
‐
6.1 Display configuration
Switch Left‐hander or Right‐hander mode (Hex address 3)
Right‐hander mode
Command: cw 03,00
Left‐hander mode:
Command: cw 03,01
Switch big or small font for UID (Hex address 3)
Big font (by UID's longer 10 digits the display will "ticker" the UID)
Command: cw 03,02
Small font:
Command: cw 03,00
Display ON or OFF by reading the UID (Hex address 3)
To save power
Display On:
Command: cw 03,04
Display Off:
Command: cw 03,00
Display UID in Decimal (Hex address 3)
UID in decimal:
Command: cw 03,08
UID in hexadecimal:
Command: cw 03,00
By nex Power On Multipen the Display will switch !
Seite 8 von 11