Table of Contents
Advertisement
Operating the LED Candle
1. Set the ON/OFF main switch (7) at the bottom side of the LED
candle to the position ON to switch on the candle.
2. You can control all functions of the LED candle via the infrared
remote control.
3. Use the power ON key (1) and the power OFF key (2) of the
remote control to switch on and off the LED candle.
4. Press the light MODE key (3) to switch on / off an artificial
flickering effect of the LED candle.
5. Press the colour mode key "Multi Colour" (4) to toggle between a
single colour mode and a multi colour mode. In multi colour
mode, the LED candle constantly changes its colour.
6. In single colour mode press one of the colour selection keys (5)
to select a desired colour. Then the LED candle permanently
shines in the selected colour.
7. When the candle is switched on, use the timer keys (6) to set up
an auto-switch-off time. After the selected time, the candle will
switch off automatically.
8. Press the key that is labelled with "4H". The candle will switch off
automatically after 4 hours.
9. Press the key that is labelled with "8H". The candle will switch off
automatically after 8 hours.
Operation
10
Advertisement
Table of Contents
