Table of Contents
Advertisement
Inserting / replacing Battery of the Remote Control
The battery compartment of the remote control is located at the
bottom side of the remote control.
1. Depress the latch of the battery holder
plate and pull out the battery holder.
2. Insert a new battery of the type
CR2025 into the battery holder.
3. Pay attention to the proper polarity of
the battery. The plus pole is facing to
the bottom side of the remote control.
4. Insert the battery holder into the battery compartment. Push it in
as far as it will go. The latch audibly snaps in.
5. Replace the battery as soon as the range of the remote control
gets significantly lower or when the candle does not respond to it
anymore.
Inserting / replacing Batteries of the LED Candle
The battery compartment (8) of the LED candle is located at the
bottom side of the candle.
1. Depress the latch of the battery compartment cover and open
the battery compartment.
2. Insert three new batteries (not included) of the type LR03 (AAA)
into the battery compartment.
3. Pay attention to the proper polarity of the batteries. The polarity
is printed inside the battery compartment.
4. Close the battery compartment.
5. Replace the batteries as soon as the illuminating power gets
weaker or when the LED does not shine at all anymore.
Operation
9
Advertisement
Table of Contents
