Download Print this page
Diamondback 64684 Owner's Manual & Safety Instructions

Diamondback 64684 Owner's Manual & Safety Instructions

10" heavy-duty tile saw

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18i

Advertisement

loading
Need help?

Need help?

Do you have a question about the 64684 and is the answer not in the manual?

Questions and answers

Summary of Contents for Diamondback 64684

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Table Of Contents

    4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 3 15. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before plugging in. Item 64684 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Freehand – Feeding a workpiece through the saw without using a fence or guided support 8. Make sure the workpiece is supported to guide it. nOt a SaFE MEtHOD. at all times while sawing. Page 4 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 5 GFCI device. to allow GFci unit to function properly, EXtEnSiOn cOrDS MuSt nOt BE uSED with this tiLE SaW. Item 64684 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Eye protection must be ANSI-approved which cannot be built into this product, and breathing protection must be NIOSH-approved but must be supplied by the operator. for the specific hazards in the work area. Page 6 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 7: Specifications

    Distributed by Harbor Freight Tools with this product will increase eye hazard. 3491 Mission Oaks Blvd. Camarillo, CA 93011 63900 Manufacture Date: ___________, ______ AVOID EXPOSURE Laser light is emitted from this opening. Item 64684 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Setup

    Lever′s pin with the hole in the rail, and press the Lever towards the rail. Pull out on the Lever to unlock the Table. Page 8 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 9 Clamps together to secure Hose. M10  x   7 0 cap Screw Flat Washer 6. Tighten previously installed M10  x   5 0 Hose Socket Head Cap Screws securely. Hose clamp Motor Head installation Item 64684 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Splash Guard through the screws. note: It is not necessary to loosen or remove the screws on the Blade Guard to install the Side Splash Guard. Side Splash Guard Splash Guard installation Page 10 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 11 Extension Table Lock table table Knob (56). Tighten the Lock Knob underneath the Extension Table clockwise to secure in place. Extension table Lock Knob Extension table installation Item 64684 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Stand M8  x   2 0 Screw 4. Insert M8  x   2 0 Socket Head Cap Screws through Ø8 Washers and into holes. Tighten securely. Mounting Saw to Stand Page 12 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 13: Operation

    8. Place Spindle Nut on Spindle. Press and hold the Spindle Lock in. Wrench-tighten Spindle Nut securely. Release the Spindle Lock. 9. Close the Blade Guard, and use Blade installation the Guard Knob to secure it. Item 64684 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Tab underneath Tray B into the hole on the Rear Extension Tray. Turn the Tab to secure Extension Tray B in place. Side Extension tray a rear Extension tray Extension tray installation Page 14 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 15 3. Depth Stop: This controls the maximum cut depth. If the blade cuts too deeply or too shallowly; loosen the Depth Stop Lock, adjust the Depth Stop, and tighten the Depth Stop Lock again. Depth controls Item 64684 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16 ON/OFF Switch down. 6. To lock the ON/OFF Switch, place it in the OFF position and insert a padlock (not included) through the hole in the Switch. turning Saw On/OFF Page 16 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 17 12. To prevent accidents, turn off the tool and unplug the tool from its electrical outlet after use. Clean, then store the tool indoors out of children’s reach. Bevel cut Item 64684 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18: Maintenance

    • Rails • Water Tray (empty out sediment and water) • Pump filter and housing Page 18 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 19 4. Wear ANSI-approved safety goggles and NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 64684 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 20 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 21: Parts List And Diagram

    Table Lock Lever Pan Head Screw M5  x   1 6 Extension Table Lock Knob Water Hose Baffle Extension Table Pan Head Screw M4  x   8 Miter Gauge Assembly Saw Blade Item 64684 For technical questions, please call 1-888-866-5797. Page 21...
  • Page 22 Motor Head Bevel Angle Plate Wheel Flat Round Head Screw M6  x   1 2 Right Wheel Bracket Assembly Rear Arm Cover Socket Head Cap Screw M6  x   3 0 Page 22 For technical questions, please call 1-888-866-5797. Item 64684...
  • Page 23 Diagram Item 64684 For technical questions, please call 1-888-866-5797. Page 23...
  • Page 24: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Save PDF