Download
Share
Print this page
Diamondback 64683 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Diamondback Manuals
  4. Saw
  5. 64683
  6. Owner's manual & safety instructions

Diamondback 64683 Owner's Manual & Safety Instructions

7" heavy-duty tile saw with sliding table
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18j

Advertisement

loading
Need help?

Need help?

Do you have a question about the 64683 and is the answer not in the manual?

Questions and answers

Ernesto Baez
February 13, 2025

Need to buy the rollers for the diamondback model 64683. they are identified as part #94 on the manual.

0

Related Manuals for Diamondback 64683

Summary of Contents for Diamondback 64683

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. 6. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys. Page 2 For technical questions, please call 1-888-866-5797. Item 64683...
  • Page 3 5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug. Item 64683 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 14. Keep the guard in place while through-sawing. an uncontrolled workpiece to lift up and Verify that the spreader lines up with out of the saw toward the operator. the blade to prevent binding. Page 4 For technical questions, please call 1-888-866-5797. Item 64683...
  • Page 5 These carry important safety information. before the cord connection and the extension cord If unreadable or missing, contact connection must be placed on an elevated surface. Harbor Freight Tools for a replacement. Item 64683 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Specifications

    SaVE tHESE inStructiOnS. Specifications Electrical Rating 120VAC / 60  H z / 10  A Motor No Load Speed 6000 RPM Max. Blade Diameter 7" Arbor Size 5/8" Page 6 For technical questions, please call 1-888-866-5797. Item 64683...

  • Page 7: Setup

    Table is locked into the saw. line up this Lever′s pin with the hole in the rail, and press the Lever towards the rail. Pull out on the Lever to unlock the Table. Item 64683 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Socket Head Cap Screws securely. cap Screw M10 Lock nut 7. With assistance, place the completed Motor Head  /   W ater Tray Frame assembly on the Water Tray (77). Motor Head installation Page 8 For technical questions, please call 1-888-866-5797. Item 64683...
  • Page 9 3. Push the Table back along the Frame rails until the final set of rollers toggle engage the rails. Rotate the Toggle table Stop Table Stop to the lock position. unlock Lock table installation Item 64683 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 5. Insert M8  x   2 0 Socket Head Cap Screws through Ø8 Spring Washers, Ø8 Flat Washers and into mounting Mounting Saw to Stand holes. Secure using M8 Lock Nuts. Page 10 For technical questions, please call 1-888-866-5797. Item 64683...

  • Page 11: Operation

    8. Place Spindle Nut on Spindle. Press and hold Flange the Spindle Lock in. Wrench-tighten Spindle Blade Nut securely. Release the Spindle Lock. 9. Close the Blade Guard, and use Blade installation the Guard Knob to secure it. Item 64683 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 2. Depth Knob: The Depth Knob can be used to lock the Motor Head at a particular cutting depth; tighten it to lock the Motor Head in place, loosen it to allow adjustment. Depth controls Page 12 For technical questions, please call 1-888-866-5797. Item 64683...
  • Page 13 This tool is intended for use on extra length to allow free movement while working. man-made masonry and tile products only. Item 64683 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Clean, then store the tool indoors out of children’s reach. Store the Safety Key separate from the tool and out of children′s reach. Bevel cut Page 14 For technical questions, please call 1-888-866-5797. Item 64683...

  • Page 15: Maintenance

    Also, clean the following after only by a qualified service technician. every use, and as needed during extended use: • Rails • Water Tray (empty out sediment and water) • Pump filter and housing Item 64683 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 16 For technical questions, please call 1-888-866-5797. Item 64683...

  • Page 17: Parts List And Diagram

    Outer Blade Guard Roller Spindle Nut Screw Sleeve Outer Flange Screw Saw Blade Compression Spring Water Nozzle Bevel Lock Lever Inner Flange Lock Bolt Inner Blade Guard Screw Flat Washer Ø8 Item 64683 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 18 For technical questions, please call 1-888-866-5797. Item 64683...
  • Page 19 Diagram Item 64683 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Save PDF