Use Instructions - Beper VE.100A Use Instructions

Stand Fan Use instructions
If you decide not to use the appliance any longer, make it unserviceable by simply cutting
the supply cable after disconnecting the plug from the socket. Also make any dangerous
parts unserviceable, especially for children who could play whit the appliance.
Let other potential users read these instructions.
Keep these instructions.

USE INSTRUCTIONS

Do not plug the supply cord before assembly every the parts of the fan.
Before using, check the integrity of the supply cord and eventually remove possible nodes.
Place the fan on a flat and stable surface in a dry place.
Keep away to a reasonable distance the fan from walls, doors, windows or every object that could
avoid the appliance to work in the correct way.
Do not cover the body or grid of the fan when the appliance is working.
Do not plug objects into the grid or inside the appliance.
Do not pull on the supply cord to unplug the appliance.
After using the fan, unplug the cord supply.
If the fan must be stored for a long period or non-used, replace the fan in the original packaging in
a dry place. For every next use, check that the fan is clean and that the blades turn in the correct
way (motor off).
PRODUCT AND ACCESSORIES Fig. 1
1 – Front grid
2 – Closure nut
3 – Nut blades
4 – Blades
5 – Rear grid nut
6 – Rear grid
7 – Motor
8 – Swing button
9 – Body motor
10 – Inclination set button
ASSEMBLY INSTRUCTIONS
1 – Put the base (19) on the floor.
2 – Insert completely the internal pipe (14) inside the external pipe (15).
3 – Insert the ornament base button (18) and fix the high adjustment handle (16).
4 – Fix the external pipe (15) to the base (19) with the 4 screws (included in packaging).
Important : strongly screw the screws to the base in order to guaranty the good stability of the fan,
otherwise the fan will dangerously swing.
5 – Take off the external pipe (14), and regulate it until the desired height. Strongly screw the high
adjustment handle (16).
6 – Place the control panels (12) on the pipe.
11 – Night light
12 – Control panels
13 – Screw for pipe
14 – Internal pipe
15 – External pipe
16 – High adjustment handle
17 – Screw pipe coupling
18 – Ornament base button
19 – Base
11