Advertisement
RE - PAIR BLUETOOTH (OR PAIR NEW DEVICES)
1
When Power is ON:
If you see the blue pulsing logo the speaker is already in Bluetooth Mode.
Follow Step 2.
If you see the white rotating ring
Press and hold for 3 seconds the Bluetooth / Receive Toggle Button to enter pairing mode.
2
Blue pulsing logo will indicate Bluetooth Re-Pairing.
3
Search for "JLab Block Party" in your Bluetooth device settings and connect.
Note: If you have multiple Bluetooth devices connecting and want to connect a specific device, make sure you turn
the Bluetooth OFF on your other devices so the speaker can connect to your desired device.
ACCESSORIES
DC POWER
REMOVABLE
ADAPTOR
HANDLE
SPEAKER PORTS
/
POWER
/
STAND BY
BATTERY LEVEL
SHORT PRESS SIMULTANEOUSLY
POWER ON
/
OFF
Power ON: Press and hold for 2 seconds.
Power OFF: Press and hold for 4 seconds.
Stand By: When power is ON, press and hold for 2 seconds (See Stand By instructions for details)
PLAY
/
PAUSE
Quick press to Play / Pause
CHARGING
Note: For optimum performance, charge overnight with DC Power Adaptor prior to using.
1
Before charging, it is recommended you turn off the speaker.
2
Open the silicone cover on the back of the speaker and
connect the speaker to your computer or wall outlet using
the provided DC Power Adaptor.
3
The indicator light on the front of the speaker will blink
purple one time to indicate charging is in progress.
Allow about 6 hours to fully charge.
BUTTONS
SHARE MODE
RECEIVE MODE
VOL – VOL +
PLAY
BLUETOOTH
RECEIVE TOGGLE
EQ CHANGE
LONG PRESS SIMULTANEOUSLY
Quick Press the Bluetooth / Receive Toggle Button
Blue pulsing logo will indicate Bluetooth Mode.
Follow Step 2.
/
/
/
PAUSE
DC
/
INPUT
DC IN
AUX IN USB OUT
REMOVABLE
HANDLE
USB
AUX
CHARGE
INPUT
OUT
Advertisement
