Table of Contents
Advertisement
Problem
No reception of channels pre-
viously received
Remote control not working
Time not displayed in Standby
mode
Temporary interruptions on Pro 7,
Sat.1, TM3, Cable 1, DSF and
HOT
Unit cannot be operated
Your receiver bears the CE control label, and complies with all
Subject to change and printing errors. Correct at 01/01
TechniSat and TechniBox CAM 1 plus are registered trademarks of
Possible Cause
Dish faulty, or position changed
Channel moved to another trans-
ponder
Channel no longer broadcast
Wrong mode set
Batteries spent
Time not entered
Interference caused by DECT
cordless telephones
Defective data stream -> unit
blocked
relevant EU standards.
TechniSat Digital GmbH
P.O.Box 560
D-54541 Daun
Germany
www.technisat.de
45
Solution
Check dish
Initiate search (see point 7.7)
None
Change mode to SAT1/SAT2
Replace batteries
Set to ZDF for 30 secs.to acquire
time
Place telephone base station furt-
her from receiver
Depress both up and down pro-
gramme keys on receiver for 5
secs. simultaneously, then switch
on unit again
333_01
Advertisement
Table of Contents
