Restoring Original Factory Settings; Delete Total Programme Memory; Service Channel - TechniSat TechniBox CAM 1 plus Instruction Manual

> Use the
> Confirm with the
The sub-menu
This function will delete all personal settings, and will restore all default settings as progra-
med in the factory.
This function will delete all channels/programmes stored in memory.
> Use the
> Confirm with the
Please note any notes and information displayed on the screen.
In addition, your receiver provides a facility for its operating software to be updated via satel-
lite (ASTRA at 19° East).
> Press the
> In order to update the software, mark the entry
> Confirm
> Read the note displayed on screen, and confirm with the
> Press the
When the software has been fully loaded, the function Download enabled will be automatical-
ly reset to .
Should the parameters of the data channel for the download of software updates be chan-
ged, you can correct them in this menu as described under points 7.7.3 and 7.7.4 (search for
transponders and programmes). Current transponder information can be obtained from your
retailer, or from our homepage in the Internet. Under normal circumstances you should not
change the settings in this menu.
keys to mark the entry
key.
will be displayed.
keys to select the entry.
key.
key to call up the sub-menu
by pressing the
key to return to normal operation.
key.
38
.
key.