Programs; Common Interface - TechniSat TechniBox CAM 1 plus Instruction Manual

> Use the
> Confirm with the
The menu
This menu differs from the
> Proceed as described in Point 7.7.3 above.
> Use the
> Use the

7.8 Common Interface

This entry provides you with access to the sub-menus of the CA modules in slots A or B,
when inserted. Use the
firm with You can then obtain information relating to the smart card inserted.
7.9 Activate factory settings/change data channels
You may at any stage revert to the original default settings for the LNB, as set in the factory.
You may also wish to delete the programme list, which may be outdated, completely before
initiating a new search. Please note that, if you delete all programmes from memory, you will
then have to initiate a search, and you will have to copy your selected programmes from the
Total List into the User List.
> Use the
> Use the
> Confirm with the
The sub-menu
keys to mark the entry
key.
will be displayed.
keys to mark the entry
to enter the Service ID number.
to mark the desired function, one of the slots, and con-
key to display the
keys to mark the entry
key.
will be displayed.
menu only in terms of the list item
.
37
.
.
.
.