General Operation; Information Banner; Electronic Programme Guide (Epg) - Technika LCD32-209V Operating Instructions Manual

After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
To search for analogue channels, select "Yes". TV
switches to the analogue TV mode.
menu will be displayed.
Select your Country, Language and Text language
by using " " or " " and " " or " " buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
For more information on this process, see "Install
Menu" section.
Note : For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM (for
Do not turn off the TV while initializing
installation.

General Operation

Press the SOURCE button on the remote control
and select DTV/USB to switch the TV set to digital
terrestrial television broadcasting.

Information Banner

• Whenever you change channel, using the
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner
MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd 11 MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd 11
Analogue search
UK broadcasts only).
fi rst time
P- / P+
English - 11 -
at the bottom of the screen (available only in DTV
mode). This will remain on the screen
seconds.
• The information banner can also be displayed at any
time while watching TV by pressing the
on the remote control:
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
If the selected channel is locked, you must enter the
correct four numeric code to view the channel.
PIN" will be displayed on the screen in such a case:
Electronic Programme Guide
(EPG)
• Some, but not all, channels send information about
the current and next events.
• Please note that event information is updated
automatically. If there is no event information data
available in channels, EPG will be displayed with
blanks.
• Press EPG button to view the EPG menu.
• Electronic Programme Guide appears on the screen.
It is able to get Information of the channel - programs
weekly by means of 7-DAY-EPG. All programs of
channels are displayed. On the bottom of the screen;
info bar, showing all the available commands, will
be displayed.
for a few
INFO button
"Enter
16.08.2009 11:42:26 16.08.2009 11:42:26