Using The Timers - Technics SC-DV170 Operating Instructions Manual

6
œPLAY/œREC
1
CLOCK/TIMER
1
—DEMO
2
SET
2–5
? TUNING
1
SET
2
6
H/I
42
RQT5471
1 2–5
FPLAY
@
2
FPLAY
3
FPLAY
4
FPLAY
CH
FPLAY
5
FPLAY
FPLAY
FPLAY

Using the timers

The play timer
This timer starts play of a selected source at a selected time.
The example shows settings for preset radio channel 8 to play be-
tween 6:30 and 7:40 at
Preparation:
Turn the unit on, set the time (á page 12), preset
radio stations if you want the timer to start playing
the radio (á page 25).
1
Press [CLOCK/TIMER, –DEMO] to
select "FPLAY."
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^-------------------------------------------------------------------}
Press [SET] within 3 seconds.
2–5
Press [TUNING (
the appropriate setting and
press [SET] to confirm.
2 Select the start time.
3 Select the finish time.
4 Select the source.
TUNER()DVD()TAPE
^----------------------------------J
Insert a disc or tape if you select these sources.
If you select TUNER
Select a preset channel.
5 Select the volume.
The play timer is now on standby. The display shows each
setting again then restores the original display.
6
Press [ /I] to turn the unit off.
The "FPLAY/FREC" indicator remains lit to show the play (or
record) timer is on even when ECO mode is selected (á page
12).
The timer starts at the set time with the volume increasing gradually
to the set level.
To cancel the timer
Press [FPLAY/FREC] so "FPLAY" goes out.
Each time you press the button:
FPLAY>FREC>FPLAY FREC>Light off (OFF)
^---------------------------------------------------------------------------------}
The play timer function will be canceled, but the settings stay in
MHz
memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.
40 dB.
or )] to select