Recording Discs - Technics SC-DV170 Operating Instructions Manual

INPUT SELECTOR
DISC 1—5
A
1
2
REC
H
PAUSE
3
B
CD EDIT
38
RQT5471
1 2
CD EDIT
@
@
REC
2 Î NR
REC
2 NR
Î

Recording discs

Preparation:
Do the preparatory steps (á page 37).
Insert the disc(s) you want to record (á page 14).
Press [DISC 1]–[DISC 5] to select the disc you want to start record-
ing, then press [ ] twice to stop the disc.
Normal recording
A
[CD]
1
Press ["]
then [º] to set the tape direction.
3
2
Press [
3
Press [!] on the changer.
Recording starts automatically.
4 seconds after the disc(s) finishes, the deck goes into the recording
standby mode.
To stop recording
EITHER
Press [ ] on the changer.
The deck goes into recording standby mode 4 seconds later.
OR
Press [ ] on the deck.
Recording stops immediately but the disc continues to play.
To record programmed tracks
Program tracks before step 1 (á page 20).
One touch disc editing
B
[CD]
This function makes it easier for you to record from Video CDs and
CDs.
When recording, if a track is cut off in mid-track at the end of the
forward side, it is recorded from the beginning on the reverse side.
(Ensure the reverse mode "d" is selected.)
At the end of the reverse side recording stops and the current track
will be interrupted.
Press [ ] or [ ] then [ ] to set the tape direction, and
press [INPUT SELECTOR] to select "DVD" as the source,
then
Press [CD EDIT].
Recording starts. In the meantime, "CD EDIT" will scroll across the
display from right to left.
After edit-recording has finished, the cassette deck automatically
EDIT
stops.
To stop editing
Press [ ] on the changer. The cassette deck also stops.
"EDIT OUT" is displayed.
To edit programmed tracks
Program the tracks (á page 20) and press [CD EDIT].
For your reference:
"ALL DISC" or "1-DISC" can be combined (á page 15).
PBC on Video CDs is automatically canceled.
"ERROR" is displayed if the disc in the playing position is a DVD or
the resume function is activated.
or [!]
(reverse side) (forward side)
REC PAUSE].