Advertisement
A D D I T I O N A L
i n f o r m a t i o n s
Tapes recorded in Mesecam can by viewed
on a PAL-Mesecam video recorder.
Select MESECAM OUI in the Main Menu to
record or playback a tape using Mesecam.
NTSC is the television standard used in the United States, Japan and other countries. Your
video recorder can play VHS-NTSC tapes, but you must have a PAL standard TV set. Most
PAL TV sets provide satisfactory pictures from NTSC tapes.
SLP on the video recorder display indicates that the tape was recorded using Super Long Play.
To avoid erasing one of your tapes by accidental over-recording, we recommend you protect
them by breaking the security tab.
To reuse a protected tape, just stick a piece of adhesive tape on this place.
Unprotected
On December 31st 1999 at midnight, the clock of your video recorder will switch over to the
year 2000. However, should your appliance be disconnected from the mains at that moment,
you will have to change the year manually.
Proceed as follows: press MENU, 3, then enter time, day, month. With the keys PR+ and PR-,
position the cursor on the 1 of 199- and press 2. To replace the other digits, proceed likewise.
Store by pressing D.
Your video recorder can save energy thanks to the ECO MODE
function which decreases the power consuption in STANDBY mode.
Only a red light is on.
With this mode activated, time is no longer displayed.
Press button 7 in the MENU PRINCIPAL to select MODE ECO OUI.
16
Mesecam
NTSC tape
Protection of the tapes
VHS
Transition to the year 2000
Eco mode
MENU PRINCIPAL
1
PROGRAMMATION
2
INSTALLATION
3
REGLAGE DE L'HORLOGE
4
REGLAGE IMAGE
5
MESECAM oui / NON
6
SHOW VIEW
7
MODE ECO oui / NON
8
FONCTIONS HIFI
E
SORTIE
Protected
MENU PRINCIPAL
1
PROGRAMMATION
2
INSTALLATION
3
REGLAGE DE L'HORLOGE
4
REGLAGE IMAGE
5
MESECAM oui / NON
6
SHOW VIEW
7
MODE ECO OUI / non
FONCTIONS HIFI
8
E
SORTIE
VHS
Advertisement
