Mounting; Selecting A Suitable Mounting Location - Homematic IP HMIP-SWDO-I Mounting Instruction And Operating Manual

You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
shortly (see fig. 3).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of
the device number (SGTIN) in your app or scan
the QR code. Therefore, please see the sticker
supplied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Please select, in which application (e.g. climate
control and/or security) you would like to use the
device.
• In the app, give the device a name and allocate
it to a room.
5.2

Mounting

Please read this entire section before starting to
mount the device.
5.2.1

Selecting a suitable mounting location

• Select a window or door for mounting the win-
dow / door contact.
Start-up
33