Table of Contents
Advertisement
Settings
Showing Demonstration
EN
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold CLOCK on the remote control
until the hour flashes on the display.
2. Press SKIP BACKWARD
or SKIP
FORWARD
to set the hour and then press
CLOCK to shift to minute digits.
3. Press SKIP BACKWARD
or SKIP
FORWARD
to set the minute.
4. Press CLOCK to save settings and STOP
to quit setting.
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
Setting the Timer
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
Timer
On 00:00A
2. For setting time, press SKIP BACKWARD
or SKIP FORWARD
to set the hour and
then press TIMER to shift to minute digits.
9
3. Press SKIP BACKWARD
or SKIP
FORWARD
to set the minute.
4. Press TIMER to change to Timer Off setting
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
Timer
On 00:00A
Off 00:00P
5. Press TIMER to select source. Press SKIP
BACKWARD
or SKIP FORWARD
to
select TUNER / TUNER REC / DISC / UDISC (USB)
/ CARD.
Timer
Source
Tuner
If TUNER REC is selected, press SKIP
BACKWARD
or SKIP FORWARD
to select the preset station.
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
Timer
Volume
10
7. Press TIMER to save settings.
Press STOP
to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon
is displayed when timer is
activated.
Settings
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep
mode is activated.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Sound Features
Volume Control
Rotate the volume control on the main unit or
press VOL
or
on the remote control to
adjust volume level. The volume level shows
briefly on the display.
Bass Boost
Press B.BOOST to turn on/off boosting the bass
frequency. The BASS BOOST icon lights on the
display when it is activated.
Muting Audio
Press
MUTE on the remote to cut the sound
(Remote Only). MUTE flashes on the display.
Adjust Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The display shows your
selection briefly and the relative icon lights on
the display.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press SKIP
BACKWARD
or SKIP FORWARD
cycle among displayed bass and treble range
levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
4. Press EQ to exit.
BAS
+2
TRE
00
Custom
EN
to
10
Advertisement
Table of Contents
