Melco N1A EX User Manual page 75

Chapter 4 Appendix
DSD Playback Mode
Precision Start Latency
USB-CD Drive
Configure settings to import music files from a music CD using an optical drive.
CD-DA Import File Format
Maximum Read Count
Advanced Drive Optimization
Date and Time
Configure the time settings of the Digital Music Library.
Auto
Manual
Time Zone
Configure the time zone for date and time settings.
Auto Power Save
Configure whether to shut down the Digital Music Library automatically if the music stops playing and a specific
amount of time passes. You can select from off, 1 minute, 5 minutes, 15 minutes, and 20 minutes.
Notes:
• The Digital Music Library will not be powered down while playing music.
• If the Digital Music Library is accessed from a Network Audio Player or computer, it will not be powered down
even after the specified time passes.
Configures the playback mode if playing DSD files on the Digital Music
Library using a USB-DAC.
If playing DSD files without converting them, select "Standard". This mode
will select the playback mode between Markerless DSD playback or DoP
(DSD over PCM) playback for the DSD files automatically. Use this mode
normally. If you prefer the DoP playback, select "DSD over PCM Priority
Mode". If the connected USB-DAC only supports PCM, select "PCM Mode".
Configures a gap time that precedes a playlist track. This also solves an issue
that occurs with specific USB-DAC devices.
Selects import file formats from either "FLAC" or "WAV". If you select "FLAC",
configure the compression level used when importing music files as well.
Available compression levels are below.
No Compression: The music files will not be compressed during importing.
Low Compression: Compression time is less than standard compression.
The resulting file quality corresponds to FLAC 0.
Standard Compression: Compression time is not as long and the size
remains average. This is the same as common FLAC file format. The resulting
file quality corresponds to FLAC 5.
High Compression: Compression time is longer but the resulting file size is
smaller. The resulting file quality corresponds to FLAC 8.
Configures the number of times a CD will be read when inserted into the
Digital Music Library.
Configures the read sample offset correction values between "-2000" to
"+2000". This value will vary depending on what type of CD drive you use. It
is configured to "±0" by default. This doesn't need to be changed normally.
Configures the time settings acquired from the NTP server via the Internet.
Configures the time settings manually.
74