Table of Contents
Advertisement
Chapter 2 Basic Usage
N1Z EX
1
Power Button (
)
Press to turn the power on and off.
2
Power LED
While the N1 EX is powered on, the LED will glow blue. It will extinguish when powering off.
Note: The brightness of the power LED can be changed from Settings - Display - Power LED Brightness.
3
Display
Displays the device's status and settings menu. In case of an error, displays the error code and message.
Note: The brightness of the display panel can be changed from Settings - Display - Brightness. If the display
brightness is set to Dark Mode, the display panel will be turned off.
4
Back Button (
)
Press this button to return the menu to the previous screen. If you press and hold this button for 2 seconds
while at the home screen, the display panel will be turned off.
5
Menu/Enter Button (
Press to make a selection on the display panel.
6
Down Button (
)
Press this button to scroll down.
To initialize settings, press the power button while holding down this button.
7
Up Button (
)
Press this button to scroll up.
8
USB Port for USB-DAC
Use this port to connect a USB-DAC device.
9
Ground Port (
)
Use this port to connect a grounding cable (sold separately).
1 2
8
9
10
)
3
11
12 13 14
11
4
5
6
7
15
Hide quick links:
Advertisement
Table of Contents
