Remotely Operating The Digital Music Library - Melco N1A EX User Manual

Chapter 2 Basic Usage

Remotely Operating the Digital Music Library

To remotely operate the Digital Music Library using a web browser, go to Settings > Support and select "On" for
"WebRemote"; enter the Digital Music Library's IP address into the browser's address bar and press the Enter key. The
page below will open. You can operate the Digital Music Library remotely by clicking or tapping the buttons on the
web page. As the display changes on the web browser, the Digital Music Library's display will change accordingly
to match. You can still manually operate the Digital Music Library using its physical buttons while WebRemote is
enabled.
While "WebRemote" is set to "On", the "Settings" page will not show "Network", "Drive", and "Initialize Settings" so
that no one other than you can change, configure, or execute these settings. To display these settings, disable
"WebRemote".
Please note that not all features of the Digital Music Library will be available from a web browser.
N1 EX
20