Cooking Rice - Russell Hobbs Nutrichef RHGC14 Instructions & Warranty

CHART FOR PORRIDGE PROGRAM
• Please use the measuring cup provided (160ml) to measure both the oats and water.
NOTE: Please do not cook more cups than recommended per program as this could cause
overflow.
PORRIDGE
Rolled Oats
NOTE 3 cups is the maximum amount of Rolled Oats recommended to cook.

COOKING RICE

1. Measure desired amount of rice with the provided measuring cup and add to the cooking
bowl. For best results rinse the rice to remove any excess starch and then drain.
NOTE: Please refer to the cooking chart and use the measuring cup provided.
2. Using the measuring cup provided, add the required amount of water to match the
number of cups of rice being cooked (refer to Cooking Chart).
DO NOT fill past the maximum volume printed in the cooking bowl.
Add butter, oil, or seasonings as desired.
3. Place the cooking bowl into the cooking base and then close lid.
4. Plug in the appliance. The function lights and dashes on the display will blink, indicating
that the unit is in standby mode. Select the desired rice setting by pressing the RICE
button until the light above the desired rice setting flashes.
5. Press the START/STOP button and the light above your selected rice will turn solid and
the display screen dashes will begin rotating. This means the appliance is cooking.
6. When the rice is ready, the unit beeps three times and switches to KEEP WARM and the
display will start counting up the hours for up to 30 minutes.
7. For best results, allow the rice to rest on warm for 15 minutes with the lid in place. This
will help further steam the rice. If desired, stir the rice with the serving spoon before
serving.
8. To turn the unit off, press the START/STOP button. Unplug the appliance when not in use
and always allow the unit to completely cool before cleaning.
OATS
(cups)
1 cup
2 cups
3 cups
8
WATER
(cups)
2 cups
4 cups
6 cups