Lcd Screen During Playback - THOMSON Lyra PDP2800 User Manual

LCD Screen During Playback

1
2
3
4
5
6
7
This picture illustrates what you'll see on your
Thomson Lyra Jukebox LCD screen when you're
playing music.
LCD Screen during Playback
1 Playlist name, or path of file
2 Song title or file name – Based on ID3 tag information, if it is available. If no ID3 tag
information is available, it will be blank.
3 Artist name – Based on ID3 tag information, if it is available. If no ID3 tag information
is available, it will be blank.
4 Album title – Based on ID3 tag information, if it is available. If no ID3 tag information
is available, it will be blank.
5 Genre – Based on ID3 tag information, if it is available. If no ID3 tag information is
available, it will be blank.
6 Current item – Current track being played/out of total files being played (varies
depending on the playback mode setting).
7 Volume level indicator – There are 50 steps in the volume control. Press the volume
up/down buttons to change the volume.
8 Elapsed time of track or pause indicator– When you're playing music, the amount of
time that the track has played appears; when you pause playback, the pause icon
appears.
9 Playback mode indicator
Shuffle, etc.). The icon that appears in the picture above is the Repeat Shuffle
icon ( ).
10 Bit-rate format (Recording Quality Level) – The setting you chose in the Recorder
menu (tab) that dictates the bit-rate value that's used when you convert (record) the
song using the MusicMatch Jukebox software. Go to page 27 for more information.
11 DSP setting (FLAT) – The DSP (Digital Signal Processing) setting (Flat, Rock, Bass, etc.).
For more information about DSP settings, go to page 36.
Chapter 1
PLAYLIST 1
My favorite song
Simon and Caroline
The Two of Us
Classic Rock
0005/0012
BACK DSP INFO
– Displays current playback mode (Normal, Repeat,
Getting Started
00:00:42
128K
FLAT
AB
8
9
10
11
21