Using Headphones; How To Use Your Armband; Connecting The Lyra Player To Your; Computer - THOMSON Lyra PDP2656S User Manual

Before You Begin

Using Headphones

EN
Insert phone plug into the headphones
jack ( ) of the player for listening.
Have a Blast- Just Not in Your Eardrums.
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
Caution:
Do not insert ear hook into
your ears.
7

How to Use Your Armband

1. Snap the belt clip to the back of the
unit. Recommend inserting the top of the
clip in first and then snapping the bottom
into place.
<
2. If using the armband, just slide the belt
clip through the armband vinyl clip
holder.
3. The unit will seem to have a lot of
movement within the strap, but once it is
on the arm the slack and movement will
be less.
Before You Begin
Connecting the Lyra Player
to your Computer
1. Lift the rubber cover that is covering
the USB socket on the back of the
player.
2. Insert the smaller end of the
USB cable into the socket on
the unit tightly.
3. Insert the larger end of the
USB cable to the USB socket on
the back of the computer.
Note
Refer to the "USB Driver
Installation; MusicMatch
TM
Jukebox Software" instruction
manual for procedures in setting up
USB drivers and transferring files
to the player.
Note
You must profile your
contents on your PC or on
player menu setting after file
transfer in order for the new files
to appear in the Navigation Menus.
Refer to the "USB Driver
TM
Installation; MusicMatch Jukebox
Software" instruction manual for
profiling details.
8
EN