Safety Instructions - AEG BEB231011M User Manual

3. SAFETY INSTRUCTIONS

3.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from
other appliances and units.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
Cabinet minimum
height (Cabinet un-
der the worktop mini-
mum height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
Width of the front of
the appliance
Width of the back of
the appliance
Depth of the appli-
ance
Built in depth of the
appliance
Depth with open
door
3.2 Electrical connection
• All electrical connections should be
• The appliance must be earthed.
• Make sure that the parameters on the
• Always use a correctly installed
• Do not use multi-plug adapters and
• Make sure not to cause damage to
590 (600) mm
• Do not let mains cables touch or
560 mm
550 (550) mm
• The shock protection of live and
594 mm
576 mm
• Connect the mains plug to the mains
595 mm
559 mm
• If the mains socket is loose, do not
• Do not pull the mains cable to
569 mm
• Use only correct isolation devices: line
548 mm
1022 mm
Ventilation opening
minimum size. Open-
ing placed on the
bottom rear side
Mounting screws
WARNING!
Risk of fire and electric
shock.
made by a qualified electrician.
rating plate are compatible with the
electrical ratings of the mains power
supply.
shockproof socket.
extension cables.
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
come near the appliance door or the
niche below the appliance, especially
when it operates or the door is hot.
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
connect the mains plug.
disconnect the appliance. Always pull
the mains plug.
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
ENGLISH 5
560x20 mm
4x25 mm