Connecting To The Web Server - Honeywell NetAXS-123 Quick Start Up Manual

Connecting to the Web Server

Note These steps are for computers with Windows 7 operating system.
The steps for other operating systems might be slightly different.
1. Click Start > Control Panel.
2. Click Network and Sharing Center.
3. Click Change adapter settings.
4. Identify your local Ethernet connection (Local Area Connection) and double-click on the link. .
5. Click Properties.
6. Highlight the Internet Protocol (TCP/IPv4).
7. Click Properties. View your system's current IP properties.
8. Select Use the following IP address.
9. Enter 192.168.1.10 in the IP address field.
10. Enter 255.255.255.0 in the Subnet Mask field.
Setup Process | 5
800-05780-V5A | December 2017