Panduit DPOE8S2XG Installation Instructions

© Panduit Corp. 2008
1.
Rack-Mount Installation
The PANDUIT DPoE Compact 8 Midspan may be installed in a standard 19" rack with the DPoE 1RU Shelf (PANDUIT part no. DPOESHELF),
on a wall with the DPoE Wall Mount Bracket (PANDUIT part no. DPOEWM8B) or directly on a tabletop with the rubber feet included in the
DPoE Compact 8 Midspan Kit.
To Powered Ethernet Device
2.
(Data + Power)
From Ethernet Switch
(Data Only)
Connect patch cords from an Ethernet switch to the bottom row of RJ45 connectors on the DPoE Compact 8 Midspan. Complete the data path
by connecting the top row of RJ45 connectors to powered devices either directly or through a patch panel. The upper set of LED's indicate the
status of ports 1-4. The center LED indicates the status of the power midspan. The lower set of LED's indicate the status of ports 5-8. Label
ports using the blank PANDUIT U
Installation Worksheet (PANDUIT part no. PN377*).
* Denotes revision letter.
INSTALLATION INSTRUCTIONS
ID labels and covers and record this information, along with unit specific information, on the DPoE
LTIMATE
For Technical Support:
DPoE Compact 8 Midspan
Part Number: DPOE8S2XG
DPOE8S2XG
Wall-Mount Installation
www.panduit.com/resources/install_maintain.asp
Page 1 of 2
PN420E
Tabletop Installation
INSTALLATION ADVISORY:
- Ensure that cabling to powered devices is
protected from inductive coupling from nearby
power cables and other sources.
- Ensure that powered devices are properly installed
and grounded (according to manufacturer's
recommendations), and all the cabling and
connections are isolated from external surges.
NOTE:
When installing cabling and making connections to
the DPOE8S2XG, follow all local standards as well as
the applicable TIA-942 standards and IEEE 802.3
(Ethernet) standards.