- Device Overview 1. Device Overview Light-drive Light-drive is a new e:cue product category of devices that combine a standalone DMX controller and a user interface in a single unit. Designed to allow end-users to setup custom light scenes and color-changing effects directly on the device, light-drives are easy to use and require no software to setup light scenes.
- Included in the Package 2. Included in the Package light-drive elite black white • this setup manual • micro fiber cloth • hex socket screw key • power and data merger...
- Hardware Installation 3. Hardware Installation 3.1 Mounting The light-drive elite is designed for in-wall mounting. Mounting the light-drive elite: 1. Mount the backplate 2. Connect the cable...
Page 7
- Hardware Installation 3. Place light-drive elite on the backplate 4. Tighten hex screws 13 mm / 0.51 inch Hex fixing screw Front glass plate Wall Hex fixing screw Side View Metal backplate...
- Hardware Installation 3.2 Power and Data The light-drive elite has a single RJ-45 connector for power input and data output. pin no. signal DMX - DMX + VCC in: 24V DC For a simple connection to LED fixtures, light-drive elite package includes a power and data merger, which combines power and data into a single cable according to the specification below.
- Using the light-drive elite 4. Using the light-drive elite 4.1 Overview IR receiver intensity key color key on/off key white key memory key touch wheel play/pause key LED ring 4.2 Using light-drive elite controls On/Off Key The on/off key turns the unit on or off. Fixtures will fade out when the device is turned off.
- Handling Intensity Mode Touching the intensity key activates intensity mode. For a quick change of the For fine adjustment, scroll the wheel clockwise intensity simply touch to increase the intensity, or counterclockwise to the wheel at the desired decrease the intensity.
- Handling White Mode Touching the white key activates white mode. For a quick change of the For fine adjustment, slide the wheel clockwise intensity simply touch the to for a colder white, and counterclockwise for a wheel at the desired color warmer white.
- Handling Replay Mode Touching the play/pause key starts or stops the replay mode. In replay mode, user-defined colors change gracefully from one color to the next using a configured spread. See Configuring the Spread for details. The LED ring will display a rotating color-chase according to the previously configured speed.
- Handling 4.3 Cleaning mode Touch and hold the on/off key for 5 seconds until the on/off LED is blinking, to activate the cleaning mode. In cleaning mode, touching the keys or the wheel will be ignored. This option is useful to clean the device without affecting the controls.
- Handling 4.5 Remote Control All previously described features are also accessible via remote control, except “configuration of spread”, “cleaning mode” and “reset”. The unit´s on/off LED will blink when it is receiving IR-remote control signals. In addition to the four user-defined...
- Technical Data 5. Technical Data 5.1 Technical specifications Order numbers AA439160138 light-drive elite black AA439170138 light-drive elite white General Specifications Dimensions (WxHxD) 160 x 80 x 11 mm/6.3 x 3.15 x 0.43 in Weight kg / lbs 0,3 kg / 0.66 lbs...
- Technical Data 5.2 Dimensions All dimensions in mm and inch (mm/inch). 160 / 6.3 13 mm / 0.51 inch Power and data merger 31 mm / 1.22 inch 24 V DMX+ DMX-...
Page 17
- Technical Data Mounting Plate 155 mm / 6.1 inch 60 mm / 2.36 inch 83,5 mm / 3.29 inch 120 mm / 4.72 inch...
- Warning Notices 6. Warning Notices The electronic components are very sensitive to electrostatic discharge (ESD). Be careful not to touch the components. Please do all preparation work on a static-free surface. Please always ensure to wear an antistatic wrist strap.
- imprint, copyright lighting control is a registered trademark of the e:cue control GmbH. Windows is a trademark of the Microsoft Corporation, Redmond, United States of America. All other company names and / or product names are trademarks and / or registered trademarks of the concerning manufacturer.