Summary of Contents for Action Sports Equipment S000052
Page 1
Assembly, Installation, Care, Maintenance and Use Instructions IMPORTANT Please read and retain this manual as it will assist with identification for parts and service. Read these materials prior to assembling and using this netball stand. ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au Page...
Replace defectives components immediately, otherwise keep it out of use until the problem is fixed. Disassemble the product when it is not in use. Store in a dry clean place. ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au Page...
Page 3
Use the above Parts List to make sure all parts are present before the assembly of the equipment. Contact Customer Service at 1800 465 070 (Australia) or 09 488 4750 (New Zealand) if any parts are missing. ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au Page...
Connect the basketball hoop (F) to the upper pole (E) as shown in Figure 3. Ensure spring loaded locking pin is aligned with locking hole and pin locks into the secured position. ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au Page...
Page 5
Slide the upper pole (E) into the middle pole (D) and adjust the pole height with the Height Adjuster (G). Please see Figure 4. Attach the middle pole (D) to the lower pole (C) as shown in Figure 5. ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au Page...
Page 6
WARNING: DO NOT USE THE NETBALL STAND UNTIL GROUND ANCHOR PEGS ARE SECURELY IN POSITION. NETBALL STAND IS NOT RECOMMENDE FOR USE WHEN THE BASE IS NOT ANCHORED. The assembly of the netball stand is now completed. ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au Page...
Need help?
Do you have a question about the S000052 and is the answer not in the manual?
Questions and answers