Tuning In Tv Channels; Automatic Channel Search; Sorting The Channels - THOMSON DVD Player + TV Set + VCR Owner's Manual

Connections and Setup

Tuning in TV channels

EN
The first time you use the DVD/VCR, you will see the ACMS (Automatic Channel Memory
System) displayed on the screen.This system automatically tunes and stores TV channels. If you
want to return to ACMS after your initial set-up, access it via the menu (ACMS

Automatic channel search

1.
Switch the television set on.
2. Press the
control.
A B CH
N NL
Pr-12
ACMS
5.
When the automatic channel search is completed a screen showing all the channels that have
been found and the positions they have been placed in is displayed.
Note: If the station transmits VPS/PDC signals, the station name will be added automatically.
6.
The automatic channel set-up assigns the numbers to the channels in a predefined order.
These numbers may therefore not match the actual channel numbers. Should this be the case,
change these numbers by carrying out the instructions below (see "Sorting the channels").
7.
Press to store the settings.
Note:After the automatic channel search has taken place, the time and date will set automatically. If the time is
shown as --:-- on the display window, it means that the signal was too weak to allow the clock to be set
automatically. If you wish to manually set the clock, see "Setting the clock" on page 18.

Sorting the channels

For easy channel identification, we suggest that you have a TV magazine at hand.
1.
Press the
PR SET
2.
Press again.
01 C02
02 C03
03 C04
04 C05
05 C06
06 C07
07 C08
08 C09
P SET
R
5.
Press to leave the menu.To move or delete other channels, repeat the above process.
button to turn the appliance on and then press the
D DK E F I
P S SF OTHERS
OK i
button. Press to access the main menu. Use the
VCR
then press OK .
P SET
R
00 PR-01
00 PR-02
00 PR-03
00 PR-04
00 PR-05
00 PR-06
00 PR-07
00 PR-08
MOVE :
DELETE : , OK i
3.
Select the AV channel on the television set.The
ACMS menu screen appears. Use the
buttons on the remote control to select a country
code: A:Austria, B: Belgium, CH: Switzerland, D:
Germany, DK: Denmark, E: Spain, F: France, I: Italy, N:
Norway, NL: Netherlands, P: Portugal, S: Sweden, SF:
Finland, OTHERS.
4.
Press OK to start the automatic tuning process.
3. To move a channel, use the
select the programme number that you wish to move.
Then press . Press
position you wish to store the channel in. Press
The channel will move to the new position.
4.
To delete a channel, use the
select the channel number you wish to delete and
press .After a short while the selected channel will
be deleted.The remaining channels are resorted
automatically.
10
).
Pr-12
ACMS
button on the remote
VCR
and
and buttons to select
and buttons to
and until you reach the
and buttons to
.
OK